NickServ:CertFP

Introduction

This page describes how to connect, and identify yourself to services securely via a certificate fingerprint.

A major advantage of using a CertFP to authenticate is that you don't have to use /msg NickServ IDENTIFY anymore.

By using SSL you are also encrypting the connection between you and the server.

Prerequisites

We will be using OpenSSL to create the certificate. If you haven't already, please install OpenSSL using these instructions:

Linux

Most Linux distributions already come with the OpenSSL binary and libraries either installed by default or available to be installed from a package management system (e.g apt-get, yum, etc). If neither of these is true for you, you will need to go to the official OpenSSL website, download the sources, and compile it yourself.

Windows

To get OpenSSL support on Windows, you will need a few things. First, download OpenSSL v1.0.1i and install it. Try not to change the default installation directory. When prompted, you should choose to copy the DLL files to the "Windows system directory", or it may not work. Then, download the Visual C++ 2008 Redistributables installer, and install it.

Creating the certificate

Once you have installed OpenSSL for your platform, you will need to create a key and certificate.

Linux

For Linux platforms, the following command should be sufficient: openssl req -nodes -newkey rsa:2048 -keyout Xertion.key -x509 -days 365 -out Xertion.cer

Windows

For Windows systems:

• Click the Start button.
• Type cmd in the search bar, and click on Command Prompt.
• Type in cd C:\OpenSSL-Win32\bin and press Enter.
• Type openssl and press Enter. You should now see an OpenSSL prompt.
• At the prompt, type: req -nodes -newkey rsa:2048 -keyout Xertion.key -x509 -days 365 -out Xertion.cer and press Enter.

Alternatively, you can navigate directly to the Command Prompt if it does not show up when you search for it in the Start Menu - go to Start -> All Programs -> Accessories -> Command Prompt

NOTE: If you get the error

WARNING: can’t open config file: /usr/local/ssl/openssl.cnf

You will need to exit OpenSSL and run the following command in Command Prompt: set OPENSSL_CONF=C:\OpenSSL-Win32\bin\openssl.cfg. Do NOT close the Command Prompt afterwards. After you have executed the command, try generating the key and certificate again.

During certificate generation, you will be asked the following series of questions. Fill these in accordingly - enter your two-letter country code for the country you live in, the state/region/province name you live in + your city. Enter anything you like for organization name and organizational unit name. Use your main IRC nickname for the Common Name field. For Email Address, it does NOT have to be real but SHOULD be in proper email address format of user@domain.tld

Country Name (2 letter code) [US]:
State or Province Name (full name) [Texas]:
Locality Name (eg, city) [San Antonio]:
Organization Name (eg, company) [Stealth3]: Xertion
Organizational Unit Name (eg, section) [ISP]: IRC
Common Name (eg, YOUR name) []:
Email Address []:

Once this information has been entered, two files will then be created - the key and associated certificate - which will need to be combined together.

For Linux, run cat Xertion.cer Xertion.key > Xertion.pem. For Windows, run type Xertion.cer Xertion.key > Xertion.pem

Congratulations, you now have an SSL certificate!

Configuring your client

Now that you have your SSL certificate, you will need to configure your client to use it. This step will vary greatly from client to client - some well-known clients are covered below. If your client is not included here, check its documentation to see if it supports client SSL certificates and how to set it up to use one.

KVIrc

Move the Xertion.pem file to a safe place.

• Go to "Settings -> Configure KVIrc"
• Go to "Connection -> Advanced"
• On the Tab "SSL" check "Use SSL certificate" and "Use SSL private key' and point both to the Xertion.pem file you created.
• Change your connection settings and enable the SSL option.

mIRC

Move the Xertion.pem file to a safe place.

• Go to "Main Options Menu -> Connect -> Options"
• Click on the SSL button. (NOTE: If there is no SSL button, then OpenSSL is not installed correctly and you will need to reinstall it properly before continuing)
• Click on the empty box below "Private Key File", navigate to where you placed your Xertion.pem and select it.
• Do the same for "Certificate Chain File".
• Click OK, then click OK again.

XChat

XChat uses the pem file that corresponds with the name of the network under "Network list". If irc.xertion.org is named under Xertion, then all you have to do is move the Xertion.pem file to ~/.xchat2/Xertion.pem or C:\Users\xxx\AppData\Roaming\X-Chat 2. If it's not named "Xertion", then you will have to either rename the .pem file, or rename the network that irc.xertion.org is listed under so they match each other. Once you are done with that:

• Go to Xchat menu and select "Network List"
• Find Xertion and select "edit".
• Select the boxes "Use SSL for all the servers on this network" and "Accept invalid SSL certificate".
• Click "Close" and then click "Connect".

WeeChat

Move Xertion.pem to ~/.weechat/ssl/Xertion.pem. Create the directory ~/.weechat/ssl beforehand if it doesn't already exist.

The following commands assume your configured IRC network connection is labeled as "Xertion".

Verify SSL is properly configured:

/set irc.server.Xertion.addresses "irc.xertion.org/6697"
/set irc.server.Xertion.ssl on
/set irc.server.Xertion.ssl_dhkey_size 1024
/set irc.server.Xertion.ssl_verify off

Run the following commands for the certificate:

/set irc.server.Xertion.ssl_cert "%h/ssl/Xertion.pem"

If you're using a vhost, you'll most likely also need to set the following options to delay autojoin, so that the vhost can kick in before joining:

/set irc.server.Xertion.command "/mute"
/set irc.server.Xertion.command_delay 1

The above can also be set using the interactive iset perl script.

irssi

• Move the cert to ~/.irssi/certs/Xertion.pem
• Use the command /server add -ssl -ssl_cert ~/.irssi/certs/Xertion.pem -network Xertion irc.xertion.org 6697

If you find that irssi does not auto-join channels on connect which want you to be identified before you are joining, add -autosendcmd "wait -xertion 2000" to your irssi network settings. This makes irssi wait 2 seconds before any further action, giving services time to identify you.

Command: /network add -autosendcmd "wait -xertion 2000" Xertion

ZNC

• Ensure the Cert module is loaded.
• Log in to your web admin panel, go to the User Modules section, and select "Certificate".
• Copy the contents of the .pem file you created into the edit box and apply the changes.
• Reconnect your ZNC to the IRC network.

Now when you connect to Xertion, you should see something like this appear:

*** You are connected using SSL cipher "DHE-RSA-AES-256-CBC-SHA1" and your SSL fingerprint is xxxxxxxxxxxxxxxxxxxxxxx

If you see that message, then everything is configured properly and your client SSL certificate has been read in successfully. You are now ready to add this information to NickServ.

Add the certificate fingerprint to NickServ

Once you are connected with your SSL certificate, you will need to add its fingerprint to NickServ to be able to identify with it. Follow these steps:

• Identify yourself to services with your password: /msg NickServ IDENTIFY password
• Then, type (or copy/paste) this command: /msg NickServ CERT ADD. This will automatically add your current SSL certificate fingerprint to NickServ.

You're done! You no longer need any NickServ auto-authentication commands; you can safely disable those now. Keep your NickServ password handy just in case, though. Test it by reconnecting to the network. If everything was done correctly you should now be identified by services automatically using your SSL client certificate fingerprint - look for the following notice from NickServ:

-NickServ- SSL certificate fingerprint accepted - you are now recognized.

If you have any questions, feel free to join #help and ask.